Products
Existing Products
Kubela® Advanced Materials, Inc. (KAM)
100% Acrylic Latex All-Purpose Fireproof & Waterproof Exterior Wall & Trim Protective Coating
It can be applied on virtually any surface, with only one coat required indoors and two coats recommended outdoors, usually without any primer coat, except in some severe cases with metal applications. This product will carry a transferable, lifetime warranty.
- Fireproof
- Waterproof
- Antifungal
- Anticorrosion
- Lifesaving
- 100% Acrylic Latex
- Water-based
- High Performance
- Ceramic/Titanium Infused
- Elastomeric
- Lifetime Warranty
100% Acrylic Latex Fireproof & Waterproof Protective Roof Coating
A sister product to KAM’s signature Formula A2, it has enhanced anticorrosion ingredient modifications to address the unique, extremely harsh weather and sun exposure conditions that horizontal roof coatings are exposed to 24/7. This product will also carry a lifetime warranty.
- Fireproof
- Waterproof
- Antifungal
- Anticorrosion
- Lifesaving
- 100% Acrylic Latex
- Water-based
- High Performance
- Ceramic/Titanium Infused
- Elastomeric
- Lifetime Warranty
Proposed Future KAM Products
KAM Products
All of KAM’s future advanced products will be developed and extensively tested with KAM’s amazing team of top organic and paint chemists and testing facilities, commencing with its interior paint product, rapidly followed by the products as displayed (at right).
All future paint and coating products will share a very critical common thread of being, highly innovative, ultrahigh performance, groundbreaking, and most importantly, all will be problem solving in nature, formulated to aggressively repel corrosion and endure for a lifetime without any product failure.
PaintOnce® Interior 100% Acrylic (Fire Rated) Latex Wall & Trim Paint
This will be KAM’s interior version of its signature PaintOnce® Exterior Paint, which will also be a fireproof, advanced, high performance, 100% acrylic, antifungal/viral/mold, ceramic/titanium dioxide infused product, engineered for indoor applications. It can be applied on virtually any surface without primer. Like all KAM’s products, it will be subjected to an exhaustive list of rigorous tests and will be supported by a transferable, lifetime warranty. There are currently no DIY, mainstream, affordable, fireproof, antiviral interior products on the global market.
ClearSEAL™ All-Purpose 100% Acrylic Latex Sealant/Protectant
This future advanced, super-high performance, all-purpose, water-based, 100% acrylic latex protective clear sealant will provide both beauty and powerful corrosion protection for most exterior or interior surfaces where clear coats are desired or needed. It will be highly resistant to yellowing, cracking, chipping or peeling and will prolong the life of most substrates while dramatically reducing surface fading, providing a cleanable, beautifully preserved surface for many years.
MasterPRIME™ All-Purpose 100% Acrylic Latex Primer
This will be an all-purpose, advanced, super-high performance, 100% acrylic latex primer formulated to protect virtually any exterior or interior surface as a compelling, anticorrosion, highly protective water-based primer coating. It will be designed to replace toxic, but historically much more durable, oil-based primers and outlast competitor primers by 3-5 times, including against better performing oil-based primers, which generally last longer but are highly toxic and non environmentally friendly products. This product will carry a transferable, lifetime warranty.
Fire-n-Water STOP™ 100% Acrylic Latex (Fire Rated) Waterproof Protective Undercoating (Tarpaper/Roof Underlayment Replacement)
This revolutionary, advanced, high performance, lifesaving, ceramic/titanium dioxide infused, 100% acrylic latex, elastomeric, waterproof and fireproof, anticorrosion undercoating will be engineered to replace virtually any of the environmentally harmful, petroleum-based tarpaper and later-to-market synthetic Tyvek products, all of which are currently widely used as roof and exterior wall systems underlay during new construction, primarily as a “permanent” water barrier.
BoatBOTTOM™ Marine 100% Acrylic Latex Waterproof Antifouling Coating
KAM will create a revolutionary, innovative, 100% acrylic latex, ceramic/titanium dioxide infused, water-based, anticorrosion, waterproof marine antifouling bottom coating, utilizing KAM’s yet-to-be-created BARNACOL™ Marine Antifouling Bottom Coating Additive.
CorrodeSTOP™ 100% Acrylic Latex Anti-Corrosion Protective Coating
This future advanced water-based, fireproof and 100% waterproof anti-corrosion protective coating will be formulated to protect against extremely harsh, unforgiving outdoor conditions, including severe and extended exposure to salt/fresh water, heat/sun, moisture and wind on any substrate type or environment. CorrodeSTOP™ will be engineered to outlast best competitor products by 3-5 times.
WaterBLOCK™ 100% Acrylic Latex Waterproofing/Water Barrier Protective Coating
This future advanced 100% waterproofing/water barrier protective coating will be formulated to withstand harsh outdoor conditions constantly underwater. WaterBLOCK™ will be formulated to deliver 100% waterproofing to any surface and will be engineered to outlast best competitor products by 3-5 times.
FireBRAKE™ 100% Acrylic Latex Advanced Intumescent Fire Retardant Protective Coating
This future advanced intumescent fire retardant protective coating will be formulated to very rapidly put the brakes on/stop flame spread during fires to structures and other substrates and materials, allowing people more time to escape, saving lives and reducing fire damage and money. FireBRAKE™ will be specially engineered for both interior and exterior applications on most surface environments. FireBRAKE™ will be formulated to last up to a lifetime based on the application environment, and by at least 3-5 times over best competitor products otherwise.
MarineSHIELD™ 100% Acrylic Latex Marine Protective Coating
This future advanced water-based, fireproof and 100% waterproof marine protective coating will be formulated to combat/stop corrosion and deliver powerful overall protection to sea vessels and structures above the waterline against the extremely harsh marine/ocean conditions on any interior or exterior marine substrate. MarineSHIELD™ will be engineered to withstand extremely severe and unforgiving conditions due to extended exposure to salt/fresh water, heat/sun, moisture and wind. MarineSHIELD™ will be formulated to outlast best competitor products by 3-5 times.
StripeGUARD™ 100% Acrylic Latex Highway Traffic Striping & Markings Protective Coating
This future advanced, water-based 100% waterproof highway traffic striping and markings coating will be formulated to withstand the extremely harsh roadway conditions, including extended exposure to salt/fresh water, snow, roadway debris, heat/sun and moisture, especially the constant, unrelenting pounding, impact and wear from 24/7 vehicular traffic. StripeGUARD™ will be engineered to be applied primarily to asphalt and concrete surfaces, but many others as well, and will be formulated to outlast best competitor products by 3-5 times.
MicrobeKILLER™ 100% Acrylic Latex Antimicrobial/Antifungal/Antiviral Protective Coating
This future advanced water-based, fireproof and 100% waterproof antimicrobial/antifungal protective coating will be formulated to kill harmful/deadly mold and mildew, as well as 99.9% of bacteria, germs and viruses (including COVID-19) on contact, without leaching out or fading away its potency, but will instead last for the life of the coating. MicrobeKILLER™ will be engineered for any substrate with both exterior and interior applications. MicrobeKILLER™ will be formulated to outlast best competitor products by 3-5 times on exterior applications and for life on interior applications.
WoodSAVE™ 100% Acrylic Latex Wood -Preservation/Sealer Protective UnderCoating
This future revolutionary advanced water-based fireproof and 100% waterproof bare wood preservation/sealer protective coating will be formulated to safely protect and preserve any wood product against termites and wood rot caused by water intrusion and exposure to weather conditions. WoodSAVE™ will be designed to replace existing costly and extremely unhealthy/toxic, fossil-fuel based wood preservation coatings, some that even include the infusion of deadly arsenic. WoodSAVE™ will be engineered to be 100% safe and last a lifetime.
Instead-of-EPOXY™ 100% Acrylic Latex Epoxy Replacement Protective Coating
This future novel, groundbreaking advanced water-based, fireproof and 100% waterproof powerful protective coating will be formulated to replace existing unhealthy, toxic oil/fossil fuel based and costly epoxies for most applications. Instead-of-EPOXY™ will be engineered to prevent corrosion, wear-and-tear and the overall degradation of the substrates where epoxy coatings were previously called for. It will withstand extremely harsh outdoor conditions, including extreme and/or extended exposure to salt/fresh water, heat/sun, moisture and wind. Instead-of-EPOXY™ will be formulated to outlast most of today’s epoxy products by 3-5 times.
LastPATCH™ Multi-Purpose Rapid-Set Asphalt & Concrete Patch Repair Compounds
KAM will create these two novel, multi-use, 100% acrylic, water-based, two-part ready-mix asphalt and concrete patch repair compounds to replace today’s existing ineffective and chronically early failure patch repair products on the global market today. LastPATCH™ products will be engineered to be affordable with very rapid set/cure rates, formulated to outlast best competitor products by 3-5 times.
MICORBICOL1™ Antiviral / Antimicrobial / Antifungal Paints & Coatings Protective Additive
This highly disruptive, novel, nontoxic, very powerful antiviral/antimicrobial/antifungal paints and coatings protective additive will be formulated to be permanently infused into all types of both water and oil based paints and coatings to kill 99.9% of germs, bacteria and viruses, including COVID-19—on contact. MICORBICOL1™ will be a permanent additive that will never leach out of the paint or coating membrane, and it will last for the lifetime of any paint or coating product it is infused into.
MICORBICOL2™ Antiviral/Antimicrobial/Antibacterial Textiles Protective Additive
This highly disruptive, novel, nontoxic, very powerful antiviral/antimicrobial/antibacterial textiles additive will revolutionize many sectors of the textiles industry, especially in the medical and hospitality sectors, to name just two. MICORBICOL2™ will be engineered to be permanently infused into all linen types, medical gowns, face masks and much more. MICORBICOL2™ will kill 99.9% of germs, bacteria and viruses, including COVID-19—on contact, and it won’t ever wash or leach out of any textile product it is infused into.
MICORBICOL3™ Antiviral/Antimicrobial /Antibacterial Cosmetics & Body Lotions Protective Additive
This equally highly disruptive, novel, nontoxic, very powerful antiviral/antimicrobial/antibacterial cosmetics and body lotions protective additive will also revolutionize these industries. MICORBICOL3™ will be engineered to be permanently infused into all types of cosmetics, body lotions, and much more, and will kill 99.9% of germs, bacteria and viruses, including COVID-19—on contact. MICORBICOL3™ will never become diluted or leach out and will last for the lifetime of any product it is infused into. MICORBICOL3™ will also greatly enhance the performance and extend the application/use life of all products it is infused into.
BARNACOL™ Marine Antifouling Bottom Coating Protective Additive
This groundbreaking, nontoxic, water-based marine antifouling bottom coating protective additive replacement will be formulated to be permanently infused into any existing bottom coating and will effectively and safely repel biofouling, such as barnacles, mussels, plants, algae, and the like, from attaching to ship hulls, propulsion systems and various other sea structures below the waterline. Moreover, BARNACOL™ will be engineered to replace all future use of today’s highly toxic and very expensive copper-based antifouling additives, which the world has been aggressively, but unsuccessfully, working for decades to eliminate as soon as possible. BARNACOL™ is a permeant additive solution—it’s very powerful novel protective properties will never become diluted or leach out of the coating membrane like all competitor additives do. BARNACOL™ will last for the lifetime of any coating it is infused into.
Partially Developed Products
Future Novel Additive Products
KAM has made a potentially groundbreaking and globally game-changing discovery of organic material that will be branded as OM28™, that, if proven successful following KAM’s initial R&D proof-of-concept stage, could very likely replace existing, highly toxic and costly copper-based marine antifouling coating additives. Moreover, it will be compatible with virtually all existing water and oil-based marine paints and coatings globally.
KAM strongly believes that if OM28™ proves effective as an antifouling additive, it will very likely also prove to be an effective antiviral, antibacterial and antimicrobial additive for most architectural paints and coatings, with virtually endless applications globally. KAM believes its novel, proprietary additive compound will kill 99.9% of any virus on contact, including COVID-19.
Even more exciting, if KAM establishes a successful initial proof of concept of OM28™, it further believes there will be many more, even higher volume global product uses beyond paints and coatings, including the cosmetics, medical and hospitality industries, as well as many others. Each product borne from OM28™ will be branded separately as indicated (at left).
OM28™ stems from a little known and somewhat misunderstood class of fossil-free, highly complex organic polymers that form key structural materials in the support tissues from KAM’s proprietary source. OM28™ also has robust antimicrobial and antibacterial benefits. In fact, some recent medical studies have shown significant promise using OM28™ for potentially revolutionary medicinal purposes. OM28™ is inexpensive and is readily and reliably available in virtually unlimited quantities globally—and will remain so in perpetuity.
Primary Features
Primary Exterior Coating Features & Benefits
Possesses an A-1 Fire Retardant rating—this is the best fire rating possible for this class of fire testing. Additionally, the coating will not burn in the pail and is self-extinguishing.
100% acrylic, waterborne product, exceeding today’s strictest environmental requirements. The coating is a nontoxic product with low VOC levels.
Produces a surface with superior hardness and will be highly resistant to scuffing, impacts, scratching, chipping, or cracking. Coating’s resistance to extended abrasion is also superior.
Contains the highest quality, cutting-edge, environmentally friendly fungicide that aggressively resists fungus, mold, mildew, and algae, both in the can and on the surface.
Will outlast typical exterior coatings by three to five times (or longer) and possesses superior aesthetic appeal. It will look great for the duration of the coating life and will significantly reduce premature fading, chalking, hazing, blistering, peeling, or checking.
Depending on the surface type, the coating provides coverage of 125 to 275 square feet per gallon. This represents more than twice the coverage area compared to other elastomeric products.
True two-coat system, achieving a dry film thickness of 10-12 mils with two coats, which is the thickness of a typical quality business card and is five times thicker than typical house paint applications.
Easily applied with a brush, roller, or commercial-grade sprayer and cleans up easily with soap and water. Initial cure (tack-free) time is generally under 30 minutes with moderate to low ambient humidity. Dries to recoat in about one hour; its primary cure rate is approximately 48 hours and the final cure rate is approximately 30 days.
Offers incredible adherence when applied to just about any substrate, including most woods, masonry, concrete, stucco, vinyl, metals, ceramic tile, composites, glass, and more. Adherence test results for paints and coatings in general rarely exceed 500psi. Coating tested at a remarkable 680psi. For perspective, typical paint products fail between 150-300psi, quality epoxies fail at 500psi, and concrete fails at 600psi.
Due to the coating’s ceramic and reflective technology, the coating can actually augment existing insulation systems to significantly reduce energy costs by reflecting heat away, slowing heat conductivity, and keeping structures cooler in summer. This is the same ceramic technology that NASA utilized to protect the Space Shuttle from the extreme heat upon its re-entry.
Will withstand normal building expansion and contraction by stretching and recovering (like a rubber band) and will span most cracks under 1/8th of an inch in width. In addition, the coating has great flexibility without cracking. Lack of sufficient elongation or flexibility will most assuredly lead to eventual early chipping, cracking, and flaking.
Coating has a strong resistance to water penetration, which prevents leaks, damage, and deterioration of just about any substrate, and has a high breathability rating, which allows water vapor to escape, helping in the prevention of unhealthful mold and mildew inside wall structures, etc.
Resists membrane deterioration, blistering, and peeling from the substrate due to high humidity or high salt spray environments.
Available in unlimited fade-resistant colors. White or pastel colors are highly recommended for the best energy savings and highest fade resistance.
Has a significantly higher spread rate and a substantially longer life with fewer required repaints, reducing labor and energy costs. This 2-coat system offers high protection of the structure with a low life cycle cost, saving real dollars for decades.
Resists the bonding of dirt. The coated surface can be easily cleaned, unlike other elastomerics, which typically trap dirt.
